The tenderloin is the glue that holds together a fly. The understanding of the basic principles of using a coil of TYER of the fly, starting the thread on a hook and on a basic control of the thread is essential to the entire ligation of the fly. Once these principles are understood to use the thread is a beginner well on their way to be able to build durable and attractive flies.
Using the coil of the fly TYER
Central to the whole fly that binds with the deputy and the hook, thread is used throughout the tying of the fly. Control over the thread is realized by the use of a coil of TYER of the fly. The coil allows the coil free TYER thread while performing other tasks during the fly-linking process.
To use the spool a reel of thread is placed between the arms of tension. The weapons of tension can be adjusted by folding over the internal pressure or external pressure to get less. The weapons of tension should be adjusted so that the coil does not spin when the coil is allowed to hang freely during ligation. Too much tension, however, will make it hard for the coil wire and cause the thread to feed erratically when you move.
The thread is inserted in the tube of the thread of the coil by means of a threader of the coil. The threader is a bent portion of wire end attached to a handle. Insert the wire threader in the tip of the tube of the coil so that it protrudes from the end of the tensioning arm. Place the ends of the thread through the wire of the threader and pull the threader from the tube of the coil. The coil is now a loaded and ready to use.
Start the thread on the shank of the hook
If specifically listed or not, requires that every fly to tie the thread is fixed quickly and easily be on the hook. This most often refers to as â € œiniziando the filettoâ € ž. Start the thread can be done using these points.
Keep the thread loose between the index finger and thumb of the left hand material. The hand material refers to the non-dominant hand of TYER. Using the spool of thread in hand, doing a wrap of thread around the shank of the hook. The hand of the thread refers to the dominant hand of TYER which is occupied as often as with the thread and the coil. Make 2-5 successive casings of the thread towards the rear of the hook which covers the first housing of the fillet and slacciar or â € œetichettareâ € ž the end of the thread. This closes the thread on the shank of the hook key. Using scissors cut off the end of editing the thread as close as possible to the junction of the shank of the hook and wraps thread. The thread started on the hour â € OEE gancioâ € ž. Basic control of the thread
While this text is intended to cover all the control functions of the thread that ties in Moscow is a good starting point. Each TYER develops a certain way of treating the thread and materials as they learn and expand in the trade.
Binding patterns of the fly egg: Tips of the fly TYER
The basic control of the thread relates to power move the thread on the hook in a manner well-ordered. The technique mentioned in the fly that binds because â € ž € filettoâ œla base of the drill is an excellent example of practice and learning the basic control of the thread. Once a TYER has learned to apply a base of the thread of a uniform layer of the thread tight other techniques are easier to learn. A base of the thread is implemented as described below.
With the thread started on the hook shank to make the shells and close following of the thread along the shank of the hook to the ultimate point of the finished fly.
Keep the hose close to the coil while the shank of the hook turn around the hook shank. Is rarely a need to have more than 1 - 1 inch between the fly and the tube of the coil.
As the thread provides the gape of the hook (the area between the point of the hook and the shank of the hook) the casings are made of a way to counter with small hooks (sizes 2 and smaller). In the tie on the hooks larger than 2 that the end of the tube coil can be passed with the gape. Do this to avoid contact with the point of the hook. If the thread is put in contact with the point of the hook and moves will be weakened or cut and scratched.
Not everyone but a good percentage of the recipes require a base of the fly as described in the thread. The basic technique is the thread happens once other forms of use of the thread can do.
With practice and persistence a complete understanding of the use of the thread can be achieved. An excellent way to practice the techniques used is the thread tying some basic models and simple to begin with. While the basic models become easier to tie a TYER can move towards more complex pilot models and ligation techniques.
No comments:
Post a Comment