Many are those who think that such assemblies are to be run under mandatory sinkers used perforated, which are not known precisely by a high flight aerodynamics. Nothing further from reality.
This low rate allows use with any type of lead and not be an obstacle to the meters that need and even will be used with the aid of bait-clips like the best of classic technical assemblies.
To achieve best performance in flight and to achieve greater distances possible with this type of assembly, we must avoid the use of common perforated leads as these tend to be typically designed for other purposes, funds difficult fishing on algae, excess current, and instead use those standards leads to more long casting you please.
To perform this type of installation will need one of your favorite leads a rubber check ball soft black rubber usually find as stops casting retention (although in this case, I'll use a glow-called "soft" anger we just as well be more economical and easy to find in stores in the industry) and, finally, a esmerillon barrel or similar type of proven resistance.
We begin by introducing the far end of the rat tail or bridge, being highly recommended in this case a good 0.50 / 0.60 absolute confidence, through the eye of the rod or esmerillon submit our lead.
Then, we will place our pearl of retention and, finally, we will post the esmerillon proven by a knot of resistance. In this case I used the well known but it would rapala other highly reliable when broken knot palomar knot style or similar.
Step Next, introduce the knot inside the ball retainer to ensure that this rests on the esmerillon and is in the best position to support the effort of the set, preventing it and snap the knot which are directly with the impact of lead in case of an abrupt output,
This low rate allows use with any type of lead and not be an obstacle to the meters that need and even will be used with the aid of bait-clips like the best of classic technical assemblies.
To achieve best performance in flight and to achieve greater distances possible with this type of assembly, we must avoid the use of common perforated leads as these tend to be typically designed for other purposes, funds difficult fishing on algae, excess current, and instead use those standards leads to more long casting you please.
To perform this type of installation will need one of your favorite leads a rubber check ball soft black rubber usually find as stops casting retention (although in this case, I'll use a glow-called "soft" anger we just as well be more economical and easy to find in stores in the industry) and, finally, a esmerillon barrel or similar type of proven resistance.
We begin by introducing the far end of the rat tail or bridge, being highly recommended in this case a good 0.50 / 0.60 absolute confidence, through the eye of the rod or esmerillon submit our lead.
Then, we will place our pearl of retention and, finally, we will post the esmerillon proven by a knot of resistance. In this case I used the well known but it would rapala other highly reliable when broken knot palomar knot style or similar.
Step Next, introduce the knot inside the ball retainer to ensure that this rests on the esmerillon and is in the best position to support the effort of the set, preventing it and snap the knot which are directly with the impact of lead in case of an abrupt output,
No comments:
Post a Comment