Inflatable Boat Material Polyvinyl Chloride PVC

Polyvinyl chloride, commonly known as PVC, is an absolute marvel to plumbers everywhere, you no longer have to deal with heavy metal plumbing pipes such as steel, copper or iron. With the arrival of light but durable PVC sewer industry was among the first to incorporate, replacing most of its materials with PVC pipes talks. In fact, these days, it would be virtually impossible to spend a whole day without seeing at least one thing made from PVC. After its invention, some manufacturers of boats found it an ideal material for the construction of inflatable boats and today, the amount of PVC pots on the market is increasing.
PVC is used for inflatable rafts is basically the same as that used for plumbing pipes. The main difference is that the material used for the construction of inflatable boats has a variety of dispersants are added to a higher degree of elasticity of the material. This causes the PVC used in the manufacture of inflatable boats are more flexible than the used in plumbing. Also certain dyes are added to make the boats have the desired colors.
There are two main advantages when using PVC coated fabric for inflatable boats rather than in Hypalon coated fabric. The first and most obvious to the consumer is that PVC inflatable boats are significantly cheaper than Hypalon. The other advantage is that the seams of an inflatable PVC coated fabric can be baked in a thermal power, requiring only moderately skilled workers for the operation of the respective machines. The Hypalon fabric on the other hand, requires that each seam is struck by fully trained workers. The savings for the manufacturer is another reason why PVC inflatable boats are cheaper than Hypalon.
Unfortunately, PVC as a material for inflatable boats has several negative factors. The first is that is highly sensitive to ultraviolet radiation, and prolonged exposure to direct sunlight causes the PVC wear quickly. If a PVC boat is left to sunlight for an extended period, the material loses its elasticity first, and then cracks begin to appear until finally no longer waterproof. The manufacturers using PVC coated fabric, add a substance that protects it from ultraviolet radiation, but has not yet been determined whether it is a real protection against this threat.
Another disadvantage of the use of PVC is that the components dispersants used to give greater elasticity, also reduce its overall stability. Most PVC inflatable boats suffer quality control problems, as the durability of the boats can vary greatly from one group to another.
While the seams of PVC inflatable boats are strong enough, the areas where the fabric is attached to a frame part of the boat are much weaker than in Hypalon boats. This is because the PVC surface adheres very strongly to other surfaces of PVC but not the case with surfaces of other materials. Another disadvantage of this is that any breakage in parts where the PVC is attached to another surface, are very difficult to repair.
The main advantage of the use of PVC on the Hypalon or neoprene, is that PVC is significantly cheaper than the other materials. These cost savings are passed - at least in part - from manufacturers to consumers, making PVC boats an article very attractive to consumers, particularly those who do not understand the differences between the boats of PVC and Hypalon or neoprene.
While it may seem like a very quick conclusion to say that PVC boats are lower than those of Hypalon or neoprene, remember that most of the conditions under which the PVC is damaged, are found mostly in tropical . Studies and surveys have shown that many boating enthusiasts in temperate climates that do not use them so frequently, show no preference for Hypalon boats or PVC.